| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Ontology:
The body and components are cast with high-grade cast iron FC-30, which is artificially normalized heat treatment and then subjected to natural aging treatment. Component processing adopts YASDA, MITSUI SEIKI, TOSHIBA, ELB and other world-class equipment for one-time clamping processing, precision size up to micron level, to ensure the high precision of the basic components of the equipment.2. Spindle system:
Using Taiwan original spindle, SNCM-21H alloy steel, after tempering, carburizing heat treatment and then computer controlled cryogenic treatment, its surface hardness up to HRC-62 ° above, single effective hardening layer up to 1.5mm above, the main shaft using dynamic pressure oil film spindle.
3.Adjust the wheel drive system:
Adjusting wheel spindle drive adopts servo motor, speed control 0-250rpm(digital control) can be arbitrarily set speed, adjust to the best linear speed, when adjusting wheel diameter changes still can maintain the same linear speed, grinding out the best product.
The servo motor is cleverly designed and installed on the adjusting wheel box and directly driven by the synchronous belt. It can hit the tilt Angle with the adjusting wheel at the same time during grinding to ensure that the two belt wheels are always parallel. It overcomes many adverse effects caused by inertia loss and chain Angle caused by chain multi-segment transmission of old centerless grinder. And eliminates the need to constantly change chains and zipper springs.
4.Main shaft circulating oil system:
Spindle automatic lubricating circulating oil (senior spindle oil 10#) and oil pressure
dressing device is the same oil pump, external tank, easy cleaning and oil change, main shaft circulating oil through two oil filter devices and equipped with pressure controller, to ensure the life of the spindle. Cooling adopts double circuit cooling system to ensure constant temperature of main shaft oil.
5.Circuit system:
The circuit of the whole equipment adopts Beijing Schneider circuit system, beautiful and durable, good operation. Increase the height of the electric box, and equipped with air conditioning cooling device, convenient operation at the same time, more conducive to the circuit system heat dissipation.
1.Technical specification:
| Project | Unit | Model: FX-18CNC-1 |
| Processing range of standard models (diameter) | mm | Φ 1-60 |
| Grinding wheel size (OD * W * OD) | mm | Φ455*205*Φ228.6 |
| Adjusting wheel size (OD * W * OD) | mm | Φ255*205*Φ111.2 |
| Grinding wheel speed | RPM | 1500 |
| Adjusting wheel speed | RPM | 0-250 |
| The grinding wheel drives the motor | KW | 11.5 |
| Adjusting wheel servo motor | KW | 3.0 |
| The hydraulic pump drives the motor | KW | 0.75 |
| The cooling pump drives the motor | KW | 0.25 |
| Adjusting wheel feed hand wheel | mm | 3.5/ RPM 0.05/ Scale |
| Adjusting wheel fine tuning hand wheel | mm | 0.1/ RPM 0.001/ scale |
| Worktable feed hand wheel | mm | 9.0/ RPM 0.10/ Scale |
| Worktable micro adjustment hand wheel | mm | 0.2/ RPM 0.001/ Scale |
| Trim feed hand wheel | mm | 2.0/ RPM 0.001/ Scale |
| Adjust wheel tilt Angle | Degree | +6 ° ~ -5 ° |
| Adjust the rotation Angle | Degree | ±6 ° |
| Machine size (length * width * height) | mm | 2350 × 1960 × 1550 |
| Packing size | mm | 2900 ×2400 × 1850 |
| Mechanical weight | KG | 2850 |
| Packing weight | KG | 3000 |
Henan xingyang factory
Dongguan factory
){kind=link}