HOTMAN Centerless Grinding Machine/Centerless Grinder Factory Best Price
Product Parameters
1.Technical specification of Centerless Grinding Machine:
| NO. |
Project |
Unit |
Model:FX-18S |
| 1 |
Machining range (diameter) |
Mm |
1-60 |
| 2 |
Grinding wheel size (OD * W * OD) |
Mm |
Φ455*205*Φ228.6 |
| 3 |
Adjusting wheel size (OD * W * OD) |
Mm |
Φ255*205*Φ111 |
| 4 |
Grinding wheel speed |
RPM |
1950 |
| 5 |
Adjusting wheel speed (continuously variable speed) |
RPM |
0-320 |
| 6 |
Grinding wheel drive motor |
KW |
7.5 |
| 7 |
Adjusting wheel motor (servo motor) |
KW |
2.0 |
| 8 |
The hydraulic pump drives the motor |
KW |
1HP |
| 9 |
The cooling pump drives the motor |
KW |
0.125HP |
| 10 |
Adjusting wheel feed hand wheel |
Mm |
3.5/ RPM 0.02/ scale |
| 11 |
Adjusting wheel fine tuning hand wheel |
Mm |
0.1/ to 0.001/ scale |
| 12 |
Bench feed hand wheel |
Mm |
7/ RPM 0.05/ scale |
| 13 |
Table micro adjustment hand wheel |
Mm |
0.2/ turn 0.001/ scale |
| 14 |
Trim feed hand wheel |
Mm |
1.5/ revolution 0.01/ scale |
| 15 |
Adjust wheel tilt Angle |
Deg |
+5°~-3° |
| 16 |
Adjust the rotation Angle |
Deg |
±6° |
| 17 |
Mechanical dimension |
Mm |
1800×1400×1450mm |
| 18 |
Packing size |
Mm |
2350×1650×1770mm |
| 19 |
Mechanical weight |
Kg |
1800 |
| 20 |
Packing weight |
Kg |
2000 |
2. Centerless Grinding Machine Accuracy:
| No. |
Grinding mode |
Work piece size (MM) |
Flatness |
Roughness |
Remark |
| 1. |
Through grinding |
Standard sample |
≤0.001mm |
≤Ra0.3 |
Select suitable grinding wheel within 100 workpiece length |
| 2. |
Cut-in grinding |
Standard sample |
≤0.001mm |
≤Ra0.3 |
3. Installation environment requirment for Centerless Grinding Machine:
| 1 |
Supply voltage |
380V |
| 2 |
Total installed power |
8KW |
| 3 |
Operating ambient temperature |
8-40ºC |
| 4 |
Grinding fluid filtration method |
Magnet or paper tape filter |
| 5 |
Cooling water pump |
0.25KW |
| 6 |
Cooling water tank |
220L |
Installation Instructions
4. Centerless Grinding Machine pre-acceptance:
Conditions for pre-acceptance:
(1) The buyer shall provide the confirmed drawings, samples and test specifications related to the grinding work piece before signing the contract and technical agreement
(2) The Seller shall keep confidential all the technical data provided by the buyer.
(3) The seller shall notify the buyer 10 days before the pre-acceptance. The buyer shall prepare 10 pieces of relevant work pieces and send them to the Seller or the buyer shall take the work pieces to the Seller's factory for site acceptance according to the circumstances.
(4) The Seller shall make preparations for the pre-acceptance before the Buyer's personnel arrive at the
equipment manufacturing plant.
(5) The parameters of the grinding wheel will be selected by the seller according to the drawings provided by the customer, and relevant grinding wheels will be configured after signing the contract.
(6) Pre-acceptance contents and standards: Acceptance specifications agreed by both parties shall be carried out according to drawing standards provided by the buyer.
(1) Equipment appearance inspection
(2) Convenience of operation and maintenance of the equipment (subject to the design of Seller's machine tool equipment).
(3) Influence of strength and rigidity of the equipment on quality (subject to the equipment accuracy test table provided by the seller)
(4) Equipment operation measured record (empty, full load running time, content, etc.).
(5) The main performance index of the equipment is recorded.
(6) Test records and assembly records of main parts.
(7) Confirmation of important parts
5 pieces of grindable products were processed continuously, which met the requirements of the drawings and the equipment ran normally.
The waste products allowed to be processed by the seller during the grinding process of the pre-acceptance work piece will be shipped to the buyer together with qualified test pieces or with the shipping machine.
In the process of pre-acceptance, the buyer has the right to put forward reasonable rectification opinions on
the equipment, and the seller can make rectification upon the consent of both parties.
The Seller can ship the equipment to the buyer only after the seller signs the pre-acceptance document.
Our Advantages
1. Parts, accessories and technical support are aviable during the whole life time of cylindrical grinding machine.
2. Quick action and reply for the technical questions at any time in the whole life of the machine.
3. Overseas after service center available in some region.
4. Engineer overseas service available on the requirement of customer(relative cost born by customer).
Company Profile
Certifications
Audited Supplier 
){kind=link}