1. Adaptable to a variety of shapes/high efficiency:
2. Special-shaped punch/special-shaped mold/polygon/ellipse/CAM and other complex polyhedral coordinate grinding models:
3. Grinding efficiency:7 minutes /1 piece Yield: 95%
4.
| Expert in non-circular workpiece grinding |
Machining diameter range |
Ø5~Ø300mm |
| Working length |
150mm |
| Strong grinding force, high processing efficiency can |
Maximum stroke of X axis |
370mm |
| greatly reduce the cost of irregular grinding. Excellent imported linear motor and torque motor |
Maximum z-axis stroke |
270mm |
| applications, running more stable, accuracy can be maintained for a long time. |
Spindle speed of grinding wheel |
|
50~3000rpm |
| Customized control system makes the operation more simple and efficient in irregular grinding. |
Minimum X/Z axis feed unit |
|
| Through no backgap high speed and high precision feed |
0.001mm |
| due to the direct drive of the workpiece head frame. |
|
|
5.Machine tool axial diagram:
6.Grinding wheel dressing:
Use a diamond roller to trim the ceramic CBN wheel. Use water cooling during dressing until the ceramic CBN wheel is repaired
7.Loading and unloading process:
The manipulator takes the blank to the top of the grinder, and the machine automatically cleans the electric disk surface. After the cleaning is completed, the mechanical hand is placed on the disk.The grinding wheel starts grinding the workpiece (grinding the workpiece needs water cooling throughout the process), the manipulator goes to the blank bin to take the blank, after grinding the workpiece is completed, the machine Mechanical hand takes off the finished product, the machine automatically cleans the electric disk surface, and puts the blank on the disk, and the robot puts the finished product into the finished product bin On, complete a loop.
8.Workpiece grinding:
9.Operator responsibility:
The operation and life of the machine depends on proper use and handling, and the responsibility of the operator lies in the correct safety of the machine Install and operate. Therefore, the operator should have the following knowledge:
1, the installation of the workpiece or machine set, operation and monitoring of the grinding machine;
2, grinding wheel abrasive product selection, use, installation; Record the data of the workpiece and optimize the processing process in detail;
3, special hazards and safety prevention requirements...... And so on.
All personnel involved are required to read, understand and follow the operating instructions (including machine and maintenance personnel). In addition, all are suitable for grinding Accident prevention regulations and safety guidelines for machines must be followed. Please read this manual carefully before use and understand all machine related Security measures. The instruction manual must be stored near the grinder machine
Audited Supplier 
){kind=link}