Basic Info.
After-sales Service
1 Year
Type
Multi-Use Grinding Machine
Automatic Grade
Automatic
Cylindrical Grinder Type
Universal Cylindrical Grinder
Grinding Maximum Outside Diameter
860mm
Internal Grinding Diameter Range
50-500mm
Maximum Grinding Height
600mm
Transport Package
Wooden Box
Product Description
1.Standard accessories:- Special control system for Siemens grinding machines
| 1/Set |
| 2. MPG electronic hand wheel | 1/Set |
3. Full cover protective sheet metal | 1/Group |
| 4. Table drive system | 1/Set |
5. Magnetic paper tape filter device | 1/Piece |
6. Grinding wheel spindle | 1/Piece |
7. Static pressure turntable | 1/Group |
| 8. Grating scale | 1/Set |
| 9. Diamond pen and fixing base | 1/Set |
10. Roller sand repair device | 1/Group |
| 11. Cooling water tank | 1/Group |
| 12. Operation manual | 1/Set |
| 13. Machine tool service tool (Toolbox) | 1/Set |
| 14. Machine tool horizontal foundation screws and foundation foot pads | 1/Set |
| 15. Grinding wheel | 2/piece |
(2) The diamond roller trimmer is installed at one end of the table and is used to trim the side and bottom surfaces respectively.
(3) The machine tool is controlled by the German Siemens or Japan FANUC system, which automatically controls the vertical and transverse feed of the grinding head, the hydraulic drive of the workbench, and the hand-held electric hand wheel.
(4) Cooling filter system: During grinding and grinding wheel dressing, the workpiece is cooled and the grinding wheel is washed. Filter using magnetic separator, paper filter and natural settlement three filtration.(5)
The coolant flow rate is 600L.(6)
Equipped with automatic quantitative centralized lubrication system, lubricate the guide rail and screw of each feed shaft, with automatic lubrication mode. The machine tool is fully enclosed (the working area and the back half of the machine tool are fully enclosed, the front-end operation position and the loading position), which is easy to clean and maintain.3.Machine parameter:| NO | Entry | Parameter | Marked |
| | Machining accuracy |
| 1 | Roundness | 0.0015mm | |
| 2 | Concentricity | 0.0025mm | |
| 3 | Surface roughness | 0.2um | |
| | Processing capacity |
| 1 | Grinding maximum outside diameter | 860mm | |
| 2 | Internal grinding diameter range | 50-500mm | |
| 3 | Maximum grinding height | 600mm | |
| 4 | Maximum load of table | 800kg | |
| | Grinding wheel spindle |
| 1 | grinding wheel speed | 2000-8000rpm | |
| 2 | grinding wheel diameter | 40-305mm | |
| 3 | Spindle taper hole | HSK-A100 | |
| | Work table |
| 1 | work table diameter | 800mm | |
| 2 | work table speed | 5-200rpm | |
| | Route |
| 1 | X axis | 300+1400mm | |
| 2 | Z axis | 600mm | |
| 3 | Fast moving speed | 24m/min | |
| 4 | Resolution | 0.0001mm | |
| 5 | B axis(assorting) | Servo division minimum 0/22.5 degrees | |
| | ATC |
| 1 | Number of knife libraries stored | 6 piece | |
| 2 | Maximum diameter of grinding wheel | 305mm | |
| 3 | Maximum length of grinding wheel | 350mm | |
| | wheel dresser |
| 1 | Diamond pen | 3 piece | |
| 2 | Diamond wheel | 2800rpm | |
| 3 | Diamond diameter | 120mm | |
4. Machine configuration:| | Item | Qua | Unit |
| 1 | Host Machine Host Machine | 1 | Piece |
| 2 | Grinding wheel CNC | 1 | Set |
| 3 | Diamond roller trimmer (without roller) | 1 | Set |
| 4 | Vertical feed grating (resolution 0.0001) | 1 | Set |
| 5 | Transverse feed grating (resolution 0.0001) | 1 | Set |
| 6 | Electric cabinet and control cabinet | 1 | Set |
| 7 | Cooling system | 1 | Set |
| 8 | Centralized automatic lubrication system | 1 | Set |
| 9 | Machine tool packaging and painting | 1 | Set |
| 10 | ATC grinding wheel Library | 1 | Set |
10.Service:
1),nstallation and commissioning:Machine tool installation foundation shall be drawn by Party B and guide the construction. Party A shall be responsible for the installation of the equipment, while Party B shall be responsible for the installation and commissioning.2),Acceptance check:Party A shall carry out pre-acceptance inspection to Party B (at the same time, conduct user training and instruct the operator to operate independently), and Party B shall be responsible for shipping the machine tools to Party A after passing the inspection. Party B shall install and debug the machine tool to Party A and complete the final acceptance. Under the guidance of Party B, Party A's operators shall carry out grinding to meet the accuracy requirements of the agreement.Pre-and final acceptance conditions are: The machine grinds test specimens with specifications specified in the agreement. Party A shall provide the rough-ground parts that meet the technical requirements and shall ship them to Party B one month before the pre-acceptance. Acceptance standards and procedures shall be carried out in accordance with the attachments agreed by both parties11.Quality assurance:1) After the final acceptance of the machine, the quality guarantee period is 12 months for the whole machine, and the warranty period of the purchased parts of the machine shall be subject to the warranty period of the manufacturer of the purchased parts, which shall not be less than 12 months.2) Upon receipt of Party A's service requirements, Party B shall send its employees to the customer's site within 24 hours to find out the reason, and within 48 hours to find out the reason and implement the countermeasures.3) Party B shall provide free technical service and maintenance for all faults (except human factors and unshouldability) within the warranty period. If the maintenance is not good, Party B shall immediately replace the corresponding parts.Certifications
Packaging & Shipping
Address:
Room 101, Building 2, No. 10 Huanhu Road, Houjie Town, Dongguan, Guangdong, China
Business Type:
Manufacturer/Factory
Business Range:
Industrial Equipment & Components, Manufacturing & Processing Machinery
Management System Certification:
ISO 9001, ISO 14001, ISO 14000
Company Introduction:
With 50000 m2 production base and 200 million USD annual production ability, and 100+ patents accumulated since 2003. Driven by the spirit of outstanding innovation, premium product quality and excellent service, Hotman becomes the top player in machinery industry in China. Since 2019, Hotman is awarded by the Ministry of Industry and Information Technology as one of the "little giants" enterprise among specialized, high-end and innovation-driven SMEs that provide distinctive products or services. These SMEs are distinguished by their focus on niche markets, strong innovation capabilities, large market share, and strengths in core technologies, which enable them to have outstanding achievements.
Gongdong Hotman Machine Tool Co, Ltd is rewarded as an "Innovative and High Tech Enterprise" in state level, and specialized in the of High precision of grinding machines in 2003, such as
High precision CNC cylindrical grinder;
High precision CNC internal grinder;
High precision CNC centerless grinder;
High precision CNC compound grinder;
High precision crankshaft grinder;
High Precision camshaft grinder;
Precision tool grinding machine;
Gongdong Hotman Machine Tool Co, Ltd is comitted to provide to customer premium quality grinding machine with best price and after-sale care.
){kind=link}