| Customization: | Available |
|---|---|
| After-sales Service: | 1 Year |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
1.Ontology:
The body and components are cast with high-grade cast iron FC-30, which is artificially normalized heat treatment and then subjected to natural aging treatment. Component processing adopts YASDA, MITSUI SEIKI, TOSHIBA, ELB and other world-class equipment for one-time clamping processing, precision size up to micron level, to ensure the high precision of the basic components of the equipment.
2.Spindle system:
The main shaft is made of SNCM-21H alloy steel, after tempering, carburizing heat treatment and then computer controlled cryogenic treatment, its surface hardness up to HRC-62° above, single effective hardening layer up to 1.5mm above. FX-12CNC spindle uses dynamic pressure oil film bearing spindle.
3.Adjust the wheel drive system:
The driving motor of the spindle of the adjusting wheel adopts Delta servomotor FX-12CNC to control the speed of 0~320rpm to adjust the optimal linear speed. When the outside diameter of the adjusting wheel changes, the linear speed can still maintain the same, ensuring the precision and finish of the machining workpiece, and grinding out the best products.
The servo motor is skillfully designed and installed on the adjusting wheel box and directly driven by synchronous belt, which can be used to hit the tilt Angle with the adjusting wheel at the same time when grinding, to ensure that the two belt wheels are always parallel, which overcomes the inertia loss caused by the chain multi-section transmission of the old type centerless grinder and many adverse effects brought by the chain Angle, and avoids the frequent replacement of the chain and the zipper spring.
4.Main shaft circulating oil system:
Spindle automatic lubricating circulating oil (senior spindle oil 10#) and oil pressure dressing device is the same oil pump, external tank, easy to clean and change oil, spindle circulating oil through two oil filter devices and equipped with pressure controller, to ensure the life of the spindle.
5.Numerical control system:
Hotman secondary development CNC system, Chinese operating interface, simple and easy to learn, with high precision servo motor, good compatibility, accurate feed!
| Mechanical specification | Model:FX-12CNC-I |
| Machining range (diameter) | 0.5mm-40mm |
| Grinding wheel size (OD * W * OD) | Φ305*150*Φ120mm |
| Adjusting wheel size (OD * W * OD) | Φ205*150*Φ90mm |
| Grinding wheel speed | 1950RPM |
| Adjusting wheel speed | 0-320RPM |
| The grinding wheel drives the motor | 5.5KW |
| Adjusting wheel servo motor | 2.0kw AC SERVO MOTOR |
| Servo feed motor | 1.5KW |
| The hydraulic pump drives the motor | 0.75KW |
| The cooling pump drives the motor | 0.125KW |
| Adjusting wheel feed hand wheel | 3.5mm/ turn 0.02mm/ scale |
| Adjusting wheel fine tuning hand wheel | 0.1mm/ turn 0.001mm/ scale |
| Feed accuracy | 0.001mm |
| Adjust wheel tilt Angle | +5°~-3° |
| Adjust the rotation Angle | ±5° |
| Mechanical dimension | 1800×1400×1450mm |
| Packing size | 2350×1650×1770mm |
| Mechanical weight | 2000kg |
| Packing weight | 2300 kg |
Xinyang factory
Dongguan factory
){kind=link}